Product Range

SIPS Wall & Floor Panels

The SIPS panel is made up of an insulation core with skins on either side of it. Generally, the insulation core is of EPS (Expanded Polystyrene) and the skins are of OSB (Orientated Strand Board). These panels can be used for walls & floors and can replace conventional framing.

www.structuralpanels.com.au

CLASSIC Range

Suitable for straight roofing from 5° roof pitch and above. This series is also suitable for all forms of curving, concave, convex, bull nose and multi wave. An extensive range of panel finishes for all environmental conditions is available.

PRO Range

762mm panel cover for roof applications from 2° roof pitch and above. Can be curved but contact Tridek office to confirm radii. This panel also used as a structural wall panel.

Available in a variety of finishes for all environmental conditions.

SMART Range

Suitable for use on roof applications from 2° pitch and above. The panel is also suited as a structural wall panel. Available in a wide variety of finishes for all environmental areas.

ICON Range

Specially developed as a structural long span panel for 1° roof pitch. Variety of finishes enables use in all severe environmental areas. Suitable for structural wall cladding. ICON has a cover of 70mm

ELITE Range

Specially developed as a structural long span panel for 1° roof pitch. Variety of finishes enables use in all severe environmental areas. Suitable for structural wall cladding. ELITE has a cover of 650mm